Space Walk is the ultimate escape room in Escape Simulator in Adrift in Space.
In this quick guide you will learn the answer to Space Walk in Adrift in Space in Escape Simulator.
This includes the first keypad, E2 door, E1 door, fuel tank, red battery, laser source, second keypad, first hatch, second hatch and how to connect the pipes.
- First keyboard
- Door E2
- Door E1
- Gas tank
- Red battery
- Laser source
- Second keyboard
- first bloom
- second bloom
- Connect the pipes
1. The first keyboard
There is a note next to the first keyboard that says “The keyboard still only accepts passwords in ascending order”.
Click on the keyboard to open it.
The keyboard has 4 numbers blurred.
Those 4 numbers in ascending order are the passcode.
Enter “2”, “3”, “5”, “7” and click the check mark.
Open the drawer and collect the Laser Source.
2. Door E2
Click the switch next to door “E2” to open it.
Connect the blue wire to the left terminal and connect the green wire to the right terminal.
Connect the red wire next to the blue wire and connect the yellow wire next to the green wire.
Therefore, the correct order is “Blue”, “Red”, “Yellow”, “Green”.
3. Door E1
Click the switch next to door “E1” to open it.
Now you need to connect the same wires as door “E2”.
Connect the blue wire to the left terminal and connect the green wire to the right terminal.
Connect the red wire next to the blue wire and connect the yellow wire next to the green wire.
Therefore, the correct order is “Blue”, “Red”, “Yellow”, “Green”.
4. Fuel tank
Click Door Controller.
Click “Sensors” to check the status of each tank.
According to the pie chart, Ix = 50%, N = 16.6% and O = 33.4%.
Total fuel weight is 12t.
Ix = 12 x 50% = 6.
N = 12 x 16.6% ≈ 2 .
O = 12 x 33.4% ≈ 4.
Click on Fuel Tank Monitor.
Enter “4”, “6” and “2” in “O”, “Ix” and “N” respectively.
Click “Verify” to verify the status of the tank.
5. Red battery
Use the Crane Control Unit to remove the red battery.
Drop the red battery on the ground.
The battery will contain a red status.
Click on the red state to collect it.
6. Laser source
Check the red status and click on the padlock to open.
Drag and drop the laser source from your inventory onto the laser source holder.
Set the state inside the battery.
Use the Crane Control Unit to place the battery back into the motor.
7. Second keyboard
Open the drawer under the second passcode.
Collect the tablets in the drawer.
Examine the tablet and look behind it.
The back of the tablet has a note about the second passcode.
Enter “1”, “5”, “3”, “1” and collect the pipes in the compartment.
8. First bloom
Click Door Controller and click “Grid”.
Hatch #3 is locked, so you need to enter the code for it.
You need to refer to the tablet for this.
Enter “C06” and click “Submit” to unlock trapdoor #3.
9. Second hatch
Hatch #1 is also locked, so you need to enter the code for it.
Enter “B04” and click “Submit” to unlock trapdoor #1.
10. Pipe connection
Use pipes and connections E1 and E2 to a working Fuel Tank Monitor. Do not connect the pipes to the damaged Fuel Tank Monitor.
Open all floor panels.
For fuel to work, you need to use pipes to connect E1 and E2 to the active fuel tank display.
You do not need to connect the pipes to the broken fuel tank monitor.
Connect the pipes according to the screenshot above.
Finally, click the switch on the Door Control Unit to exit the Space Walk in Adrift in Space!
read more
Escape Simulator decompression chamber guide
Escape Simulator Lab Tutorial
More than 420 cool, interesting and aesthetic Spotify playlist names
Categories: How to
Source: thpttranhungdao.edu.vn/en/
