Hallway Accident is the second escape room in the Escape Simulator in Adrift in Space.
In this quick tutorial you will learn how to complete Space Drift Corridor Crash in Escape Simulator.
This includes damaged connector pins, drones and cards.
- Collect all the items
- Remove the plates
- Connect the connector pins
- Insert the metal
- Copy cone
- Copy a Thruster
- Repair drones
- Laser of wall pieces
- Read card
1. Collect all the items
Click the green fingerprint next to the power switch to open the compartment.
Collect all the essential items inside the compartment.
This includes two panel removal tools, a drone recipe, a read/write keycard, a copy guide, and a pin box.
Open the pin box and collect all the connector pins inside the box.
2. Remove the panels
Use the panel removal tool to remove the boards above the ground.
There should be a total of 6 panels.
Move the panels to either side of the room.
Collect the connection pins inside the boards.
3. Connect the connector pins
Now you need to connect the connector pins from the power switch to the metal replica set.
Open the power switch.
Turn off the power switch before placing the connector pin in the slot below.
Remember that if you don’t turn off the power switch, you won’t be able to set the connector pins!
Place the rest of the connector pins into each slot on ground.
Turn on the power switch.
4. Metal insert
Open the hatch and turn off the blue switch.
Collect metal bars and metal pieces on the ground.
They are placed next to the wall piece.
Collect drone recipes on the ground.
Your inventory will now contain a few drone recipes.
This includes “Cone” and “Thruster”.
Put all metal in the “Insert Metal” compartment.
5. Copy the cone
According to the first drone recipe, you need 8 blue squares and 1 black square in the middle to reproduce the cone.
Open the metal star set and select the blue square, black square and blue square respectively.
Enter “4”, “1”, “4” respectively and click “Start”.
Collect Drone Cone.
6. Duplicate thrusters
According to the second drone recipe, you need 1 black square, 1 white square, 1 black square, 1 white square, etc. to clone the thrusters.
Open the metal duplicator and select the black square, white + black square and black square respectively.
Enter “1”, “8”, “0” respectively and click “Start”.
Collect Drone Thrusters.
7. Repair drones
Check out Drones in your inventory.
Now you need to fix the Drone by placing the parts of the Drone that you copied with Metal Replicator.
Place the Drone Cone at the bottom of the Drone.
Place the Drone Thruster in front of the Drone.
8. Laser wall pieces
Change the drone to “Rotate” mode.
Rotate the drone until it points towards the wall pieces.
Change the drone to “Location” mode.
Click the “Laser” button to activate the laser.
Laser of wall pieces are blocking the door with a drone.
9. Read the cards
Collect the first broken keycard on the ground (under the power switch).
Collect the second broken keycard on the ground (next to the wall fragment).
Insert the first broken keycard into the card reader and memorize the numbers.
Insert the second broken keycard into the card reader and memorize the numbers.
The idea is to match the numbers of two broken keycards with the red keycard.
Finally, insert the red keycard and enter 0, 1, 0, 1, 0, 1, 1, 0, 1.
Insert the red keycard into the fingerprint slot next to the door and click the fingerprint to exit the Corridor Accident room in Adrift in Space!
read more
Escape Simulator Emergency Wake Up Guide
Escape Simulator Top Guide
More than 400 funny, interesting and best gaming names
Categories: How to
Source: thpttranhungdao.edu.vn/en/
