6 Easy Ways to Disable Firewall on Windows

Windows Firewall is a security feature that helps protect your PC from unauthorized access and malware. However, there may be times when you need to disable the firewall, such as when you are troubleshooting network problems or using a third-party firewall. This guide will help you with 6 best ways to disable firewall on Windows.

Before disabling the firewall, it is essential to understand the risks involved. Turning off your firewall can leave your computer vulnerable to malware and other security threats. Also, turning off the firewall can cause problems with applications that require an Internet connection.

Therefore, you should temporarily turn off the firewall and turn it back on as soon as it’s done. With that said, let’s start the article. Whether running Windows 11 or below, you’ll find a method that works for you.

1. How to Turn Off Windows Firewall Using Windows Security

Windows Security Settings is one of the most common and easiest ways to disable Windows Firewall. Follow the steps below.

Step 1: Press the Windows key on your keyboard, type Windows Security, and click Open.

Step 2: Navigate to the ‘Firewall & network protection’ setting.

Step 3: Select Private Network or Public Network.

Note: We are using Public network.

Step 4: Turn off the ‘Microsoft Defender Firewall’ option.

In the prompt, select Yes.

Now follow the same steps to disable firewall from Private Network or vice versa. That’s it. You have successfully disabled Windows Firewall.

2. How to turn off Windows Firewall using Control Panel

This method is very handy, especially if running on Windows 10 or below. Follow the instructions below.

Step 1: Press the Windows key on your keyboard, type Dashboard, and click Open.

Step 2: Go to ‘System and Security’ option.

Step 3: Click the ‘Windows Defender Firewall’ option.

Step 4: In the left pane, click ‘Turn Windows Defender Firewall on or off’.

Step 5: Now, under ‘Customize settings for each network type’, select the ‘Disable Windows Defender Firewall (not recommended)’ option under Private Network Settings and Public Network Settings .

Step 6: Click the OK button to apply the changes.

With this, you have successfully disabled the firewall in your Windows PC. If you want to know another way, keep reading.

3. How to Disable the Firewall Using the Command Prompt

Disabling the firewall in Windows using Command Prompt seems complicated but easy to do. Follow the steps mentioned below.

Step 1: Press the Windows key on your keyboard, type Command promptand click ‘Run as administrator.’

Step 2: Type the command below and press Enter.

netsh advfirewall turn off allprofile status

Note: This command will turn off the firewall for all network profiles.

If you want to disable it for public network configuration, type the command below and press Enter.

netsh advfirewall turn off public profile status

If you want to disable it for private network configuration, type the command below and press Enter.

netsh advfirewall turn off profile status

If you want to disable it for domain network configuration, type the command below and press Enter.

netsh advfirewall turn off profile status

With any of the selected commands mentioned above, you can disable the Windows firewall. If you don’t want to do it through Command Prompt instead, use PowerShell. Read on.

4. Turn off Windows Firewall with PowerShell

Like the Command Prompt, disabling the firewall from your Windows PC using PowerShell is simple.

Step 1: Press the Windows key on your keyboard, type Windows PowerShell, and click ‘Run as Administrator.’

Step 2: Type the command below and press Enter.

Set-NetFirewallProfile -Profile Domain,Public,Private-Enabled False

Your go. You have successfully disabled the Firewall in Windows using PowerShell. If you’re not familiar with PowerShell or the Command Prompt for that matter, keep reading to discover other methods.

5. How To Disable Windows Firewall Using Registry Editor

This step is not as simple as the one above, but the steps are relatively simple to follow and implement. However, since we will be using the Registry Editor, we strongly recommend that you back up the Windows Registry before continuing with the steps.

Step 1: Press the Windows key on your keyboard, type Registry Editorand then click Open.

Note: You can also press ‘Windows Key + R’ to open the Run dialog, type regedit.exe, and click OK to open the Registry Editor.

In the prompt, select Yes.

Step 2: In the top bar, enter the address mentioned below.

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\WindowsFirewall\StandardProfile

Note: You can also navigate to this section manually.

Step 3: In the StandardProfile folder, right click, select New and select ‘DWORD (32-bit) Value.’

Step 4: Enter Enable firewall in the name field.

Step 5: Double-click the new value, enter 0 in the Value data field, and click OK.

Finally, reboot the system for the changes to take effect. And that’s it! When the system restarts, the firewall on Windows will be disabled. If you don’t want to disable the firewall from the registry, you can use the Group Policy editor.

6. How to turn off the firewall using Group Policy Editor

Most settings on Windows can be well controlled by the Group Policy Editor, and Windows Firewall is no exception. Here’s how to disable the firewall on Windows.

Note: Group Policy Editor is only available in Windows 11 Pro and Enterprise editions. If you are using Windows 11 Home Editor, you cannot use this method.

Step 1: Press the Windows keys on your keyboard, type gpeditand then click Open.

Note: You can also press ‘Windows Key + R’ to open the Run command box, type gpedit.mscand then click Open.

Step 2: In the left pane, under ‘Local Computer Policy’, select Computer Configuration.

Step 3: In the right pane, double-click Admin Templates.

Step 4: Select the Network option.

Step 5: In Network preferences, locate and click Network Connections.

Step 6: Navigate to ‘Windows Defender Firewall.’

Step 7: Select Standard Profile.

Step 8: In the right pane, select ‘Windows Defender Firewall: Protect all network connections.’

Step 9: In the ‘Windows Defender Firewall: Protect all network connections’ window, select the Disabled option. Finally, click Apply and then OK.

Your go. Now, all you need to do is restart Windows. And after reboot, Windows Firewall will be disabled. If you want to go back to normal mode, select the ‘Not Configured’ option and click Apply, then OK in the ‘Windows Defender Firewall’ window.

FAQ about Disable Windows Firewall

1. Does turning off the firewall increase the speed?

Firewall software monitors and controls incoming and outgoing network traffic; it runs in the background and consumes few resources. Therefore, disabling the firewall may not affect your system performance or internet speed.

2. Better to turn the firewall on or off?

A firewall is often recommended for better security because it helps protect your computer or network from unauthorized access, hackers, and malware. However, in some cases it can cause connection problems. It is advisable to check the firewall settings before disabling them in such cases.

3. How to turn off the firewall for Minecraft?

Here’s how to disable the firewall for Minecraft: Press the Windows key, type Windows Protection Firewall > Select ‘Allow an app or feature through Windows Defender Firewall’ > Select Change Settings > Now, under ‘Allow apps to communicate through Windows Defender Firewall’, check the box next to Minecraft.

Unprotect your Windows temporarily

Disabling Windows Firewall sometimes makes sense. However, it is also important to understand the risks involved. With the steps provided in this article, you will be able to disable the firewall in Windows quickly and effectively. You may also want to read these top ways to reset firewall settings in Windows 11.

Categories: How to
Source: thpttranhungdao.edu.vn/en/