Have you ever paid close attention to the sound on your Windows 10 computer and noticed something was wrong? You may have tried using headphones, Bluetooth speakers, or any other audio device. However, the imbalance will be clearly heard. That means one side of your headset is louder than the other. Sometimes, your audio devices simply produce distorted sound when connected to a PC.
If the audio output of your computer’s audio device is unbalanced, you don’t need to remove them or reinstall Windows. You can correct or correct the unbalanced sound. This guide will help you understand how to do it and ultimately optimize your listening experience.
What messes up the audio balance on your PC
1. Upgrading the operating system
Upgrading your PC’s operating system to a new version of Windows may disorient some of the default settings you set earlier. With a new operating system installed on your computer, there is a chance that your sound settings are distorted. Some users have reported audio imbalances after upgrading their PCs to the new OS.
2. Special sound enhancements
Windows PCs have built-in special audio enhancement features designed to make your audio device sound better. While these special audio enhancements do indeed improve the sound quality, they sometimes throw off the balance of the audio devices connected to your PC.
3. Headphones/Speakers Defective
Sometimes it’s not your PC. Your audio device’s speakers have just failed and need to be replaced. To make sure your PC isn’t the cause of the audio imbalance, here are a few ways to check (and adjust) your Windows 10 PC’s audio balance.
How to adjust the sound balance on a Windows 10 PC
1. Disable special enhancements
If you notice some degree of imbalance in the audio channels of your headphones or speakers, it could be the result of some improvements your Windows PC may have enabled by default. .
Advanced features like Bass Boost, Surround Sound, Room Correction, etc. can distort the balance of your headphone channels. To fix this, disable all special advanced features assigned to your Bluetooth headset.
Here’s how to do it.
Step 1: Right-click the speaker icon in the bottom right corner of the taskbar and select Playback Devices.
Step 2: Select your audio device and click Properties.
Step 3: In the Improvements section, check the ‘Disable all enhancements’ box. Click Apply and then OK to save the changes.
If you do this correctly, the sound quality of your audio device should now be balanced. If not, check out method 2 below.
2. Adjust speaker volume left-right
If disabling special advanced features doesn’t yield the desired results, test (and adjust) the volume for each channel. Also, you should use this method with any new pairs of headphones or speakers you plan to use with your computer. That should give you the great output point the audio device is capable of.
Step 1: Right-click on the speaker icon located at the bottom right corner of the screen and select Playback device.
Step 2: Go ahead, select the device whose audio balance you want to adjust and click Properties.
Step 3: On the new window that appears, navigate to the Levels section and click on Balance.
Step 4: Next, adjust the volume and balance of the left and right channels/speakers of your device to your liking.
Note
If the left and right channels of your audio device have different/unequal volumes, be sure to equalize them.
Step 5: Click OK to save the changes. You can play a video or music to confirm whether the changes have actually been made.
3. Tweak the registry entry
Some manufacturers permanently lock the left-right audio channels of their accessories, so you may not be able to adjust the device’s volume (as in Step 4 above).
Windows also sometimes locks the ability to adjust volume/audio balance by default. However, the good thing is that it can be unlocked. Here’s how to dissolve the general volume of your headphone channel by editing the Windows registry.
Step 1: Launch your Windows PC run function by using the Windows + R keys on your keyboard.
Step 2: Enter re-edit in the dialog box provided and touch the Enter button on your keyboard.
Step 3: Navigate to the following path/location in the registry editor:
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Bluetooth\Audio\AVRCP\CT
Step 4: At this location, double click on the value named DisableAbsoluteVolume and change its value data to 1.
Step 5: Finally, click OK to save changes and restart your PC.
Now that you have the absolute volume turned off, you can now manually equalize the audio channels of your Bluetooth headset.
Note
Balance should be restored
That’s it. You have finished adjusting the balance of your audio device(s). These tricks work with wired headphones, wireless speakers, soundbars, or any other audio device connected to your Windows PC.
Next up: Did you know that aptX HD-enabled headphones deliver immersive audio experiences? Check out the best aptX HD wireless headphones you can buy below.
Categories: How to
Source: thpttranhungdao.edu.vn/en/